A glued wooden floor can be a beautiful addition to any interior. But there comes a time when you may want to change your interior and install a new floor. In this case, removing a glued parquet floor, for example, is the first step. It may seem like a time-consuming job, but with the right step-by-step plan and the right tools you can successfully remove the old floor without damage to the subfloor. In this article we will take a closer look at the process removing floors such as a glued wooden floor, so that you can start this task well prepared.
What is a glued wooden floor?
A glued wooden floor is a floor system in which the wooden planks are glued directly to the subfloor. This type of floor has no space between the planks as is the case with a floating floor. Glue-down wood flooring is generally sturdy and durable, but if you want to install a new floor or if there is damage to the floor, you will need to remove the existing glue-down floor before you can proceed.
Required materials and tools
Before you start removing the glued-down wooden floor, it's important to make sure you have the right materials and tools on hand. Do you want a remove parquet floor? Here's a list of what you'll need:
- Crowbar
- Chisel
- Hammer
- Shelf
- Putty knife
- Circular saw
- Adhesive remover
- Cloth or sponge
- Safety glasses
- Gloves
Make sure you have all of these supplies before you start so you don't have to stop for tools while removing the wood floor.
Step-by-step plan for removing a glued wooden floor
1. Preparation
Before you start removing the glued wooden floor, it is important to properly prepare the room. Remove any furniture and other obstacles so that you have enough space to move around. In addition, it is advisable to wear protective clothing such as goggles and gloves to protect yourself during the process. As you have read before, removing parquet, removing a wooden floor or actually any other glued floor covering is a difficult job. NB! Water-soluble glue can also sometimes be difficult to remove.
2. Loosening the skirting boards
Use a pry bar and a hammer to carefully remove the baseboards. Place the pry bar between the baseboard and the wall and gently pry up until the baseboard loosens. Do this for all baseboards around the room. Do you find it difficult to remove parquet flooring? Then you can also have the parquet floor removed.
You can confidently leave the removal of the floor to the experts at ZSM House clearance. Our professionals know exactly how they can best help you. Removing a wooden floor is no problem for us. Nor does laying a new wooden floor! So if you want to remove a floor or if you want to install a new floor, you can always contact us without obligation. We would be happy to prepare a free quote for you.
3. Removing the first plank
Start by removing the first plank of the glued wooden floor. Use a pry bar and hammer to gently pry the plank up. Work from the side of the plank, taking care not to apply too much force to avoid damage to the subfloor.
4. Prying off the next planks
Once the first plank is removed, you can continue prying off the next planks. Place the pry bar between the planks and gently pry up until the plank comes loose. Repeat this process until you have removed all the planks.
5. Removing the adhesive residue
After removing all planks, adhesive residue will probably remain on the subfloor. Use a putty knife to carefully scrape the adhesive residue from the subfloor. If there are stubborn adhesive residues, you can use an adhesive remover to dissolve them. Apply the adhesive remover to the residue and let it sit for several minutes before wiping it away with a cloth or sponge. Removing adhesive residue is not a fun job, but unfortunately it really has to be done.
6. Cleaning the subfloor
After you have removed all adhesive residue, it is important to clean the subfloor thoroughly. Remove dust, dirt and any other residues to ensure that the new floor can be laid smoothly. Use a broom, vacuum cleaner or damp cloth to clean the subfloor.
7. Reusing the floor
If you plan to reuse the wooden floor, check the condition of the planks. If they are in good condition, you can carefully set them aside and reinstall them later. Make sure you mark them well so you know which shelf goes where.
Conclusion
Removing a glued wooden floor can seem like a time-consuming job, but with the right step-by-step plan and the right tools you can complete this task successfully. Follow the steps carefully, taking care to avoid damage to the subfloor and making sure you make the proper preparations. With a little patience and effort you can remove the old glued wooden floor and install a new floor to renew your interior.
Doesn't it all work? Then you can always call in the professional gentlemen from ZSM Woningontruiming! We like to help you!
Request a free quote
Would you like to receive a quote for removing glued floor coverings? Then request a free quote. This is completely without obligation and you are not committed to anything. By requesting a quote you will get a better idea of the costs and services we can offer you.
Do you have any questions or would you like advice before requesting a quote? Then you can always call us on 070-2116102. You can also send us an email at: info@zsm-woningontruiming.nl. We will then respond to your enquiry as soon as possible.
Help Center
Can I reuse a glued wooden floor?
Yes, it is possible to reuse a glued wooden floor, provided the planks are in good condition. Be sure to remove them carefully and mark them properly for later installation.
Do I need to remove all the wooden planks?
Yes, to remove a glued wooden floor it is necessary to remove all planks so that you have a clean surface for the new floor.
How do I remove the adhesive residue from the subfloor?
You can scrape adhesive residue from the subfloor with a putty knife. If there are stubborn adhesive residues, you can use an adhesive remover to dissolve them.
Do I need to remove the skirting boards before laying a new floor?
Yes, it is advisable to remove the skirting boards before laying a new floor. This ensures a tighter finish and prevents damage to the new floor during installation.
What tools do I need to remove a glued wooden floor?
Some essential tools include a pry bar, hammer, putty knife, circular saw and adhesive remover. Make sure you have all the necessary tools on hand before you start.
